Hi to everybody.
I can't understand why of the net failure shown below. Can someone help me?
If you need more info, please tell me it.
\*\* Sheet\_1 \*\*
RP1 RP1\_1 RP1\_2 GND 25K
C1 RP1\_2 C1\_2 0\.1U
C2 C2_1 GND 0,000015
C3 C2_1 GND 0,1
R3 C2_1 GND 750
R1 C1\_2 R1\_2 15K
R2 GND C1_2 1M
R4 R4\_1 R4\_2 56K
R5 VCC R4_1 18K
R9 NETPORT3 GND 15K
C4 R4_1 GND 100NF
C5 R4_1 GND 22UF
C6 R4_2 NETPORT3 100NF
V2 VCC GND 400
XFG1 RP1\_1 GND XFG1\_\- FUNCTIONGENERATOR\_XFG1
XU1 R4\_2 NoNet C2\_1 12AT7
.SUBCKT FUNCTIONGENERATOR_XFG1 1 2 3
V1 1 2 SINE(50 0.1 1k)
V2 2 3 SINE(50 0.1 1k)
.ENDS
<br>
<br>
.op
\* 12AT7 Triode PSpice Model 8/96\, Rev\. 1\.0 \(fp\)
*
\* \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
* This model is provided "as is", with no warranty of any kind,
* either expressed or implied, about the suitability or fitness
* of this model for any particular purpose. Use of this model
* shall be entirely at the user's own risk.
*
* For a discussion about vacuum tube modeling please refer to:
* W. Marshall Leach, jr: "SPICE Models for Vacuum-Tube Amplifiers";
* J. Audio Eng. Soc., Vol 43, No 3, March 1995.
\* \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
*
\* This model is valid for the following tubes:
\* 12AT7/ECC81\, 6AB4/EC92\, 6201\, 6679;
\* at the following conditions:
* Plate voltage : 0..500V
* Grid voltage : 0..-8V
* Cathode current: 0..30mA
*
\* Modified DM 28/4/97:
*
* 1 Model altered to prevent anode draw at Va < 5V. E2 is the
* anode draw multiplier in the range 0..1
*
*
\* Connections: Plate
\* \| Grid
\* \| \| Cathode
\* \| \| \|
.SUBCKT 12AT7 P G K
E1 2 0 VALUE={V(P,K)+63.19*V(G,K)}
E2 3 0 VALUE={LIMIT{V(P,K)/5,0,1}}
R1 2 0 1.0K
Gp P K VALUE=\{V\(3\)\*6\.717E\-6\*\(PWR\(V\(2\)\,1\.5\)\+PWRS\(V\(2\)\,1\.5\)\)/2\}
Cgk G K 2.2P
Cgp G P 1.5P
Cpk P K 0.5P
.ENDS 12AT7
